The WetSuit® System consists of a range of environmentally friendly solutions used throughout the building envelope that meet specific roofing, waterproofing and air/vapor barrier requirements. All of our fluid applied, seamless membranes are water based, cold applied, Coal-Tar Free, have no VOC’s, are Class A fire rated, and have self-extinguishing capabilities.
– WetSuit® 2 parts Instant set membrane
– WetSuit® 1 part Self leveling membrane
– WetSuit® Undercover pre-strip joints, penetration or details
– WetSuit® Trowel and fiberated Trowel for Patching details
– Invisilink™ reinforcing fabric
– WetSuit® PrimeMate Water Based primer
The WetSuit® liquid membrane is a fully self-adhered, cold spray applied, self-flashing membrane with a wide variety of uses for virtually all above and below grade applications. It can be sprayed to any mil thickness in a single pass thus creating a truly custom and precise membrane allowing unparalleled architectural freedom and ease of application.
FM testing proved to put The WetSuit® in a class of its own. It is one of a select few materials on the market with a Class A fire rating, severe hail resistance, 2124% elongation and a wind uplift of Class 1-990! In addition, The WetSuit® is proven as a viable air and vapor barrier. With very low perms, The WetSuit® can be employed not only in below grade applications and roofing, but in between as a seamless, fluid applied vapor barrier as well.
The water-based, no VOC, low pressure, cold spray applied, non-flammable features of The WetSuit® eliminate job hazards such as torches, solvents, and heavy equipment.
Because WetSuit® is so lightweight and with excellent adhesion to most roof surfaces, the need to tear off existing roofs is most often eliminated, greatly reducing installation costs and environmental impact. Surface preparation is generally limited to pressure washing the old roof to provide a clean surface for WetSuit® to adhere to. Utilizing only one applicator, WetSuit® can be installed at a fast and efficient rate of 1500 sq ft per hour, reducing crew size and job time.
The WetSuit® 1 Part is a water-based, medium viscosity, self-leveling membrane that can be sprayed, brushed, or roll applied up to 80 mils wet vertically. Wetsuit® 1 Part is used in roofing, waterproofing and air/vapor barrier applications.
For roofing, Wetsuit® 1 Part is ideal for standing seam metal, aged SPF, wood and concrete. Our reinforcement fabric, Invisilink®, is frequently embedded into Wetsuit® 1 Part during the preparatory phase by application to existing seams and joints, or to create a fully reinforced membrane.
A resilient floor covering of coloured natural quartz. Quartz Carpet is a durable and slip resistant overlay system suited to all architectural areas.